Heat to Bedroom 313RE
Page 1 of 1 • Share •
Heat to Bedroom 313RE
I completed the mod to get more air to bedroom and bathroom on my 2011 313RE. It seems to be doing alot better now.
What I did was to shorten the up right duct running to upstairs, its now only 5 inches high, I put the register on top of chamber, it gives a better direction to the upstairs, I opened up the hole comming from bottom duct to 4 x 6 inches. I also removed the baffels in the upstairs duct work, they were inside the duct just befor the register openings of bathroom and bedroom, You need a mirrrow to see them, I just used a screwdriver to knock them out, they just have spot welds on them so not much to remove them. Now if i can Ill post the pictures so you can see what I did.
What I did was to shorten the up right duct running to upstairs, its now only 5 inches high, I put the register on top of chamber, it gives a better direction to the upstairs, I opened up the hole comming from bottom duct to 4 x 6 inches. I also removed the baffels in the upstairs duct work, they were inside the duct just befor the register openings of bathroom and bedroom, You need a mirrrow to see them, I just used a screwdriver to knock them out, they just have spot welds on them so not much to remove them. Now if i can Ill post the pictures so you can see what I did.

Rusty- Member

- Number of posts: 138
Registration date: 2011-03-27
Age: 64
Location: Sharon, West Virginia
Heat to Bedroom 313RE




Last edited by oldelmer1 on 3/31/2011, 11:51 am; edited 1 time in total (Reason for editing : Merged pictures with text)

Rusty- Member

- Number of posts: 138
Registration date: 2011-03-27
Age: 64
Location: Sharon, West Virginia
Re: Heat to Bedroom 313RE
Thanks for putting the pictures with the text,
1st picture is the mod I did to the duct work
2nd pic. complerd mod
3rd pic. the hole I opened up, its now 4" x 6"
4th pic. the baffels I removed from the upstairs duct work
I just came from the trailer and brdroom is warmer, I dont think it can get any better unless you run duct work directly from the furnance, but you can always keep a small electric heater in the bedroom, it saves on propane too
1st picture is the mod I did to the duct work
2nd pic. complerd mod
3rd pic. the hole I opened up, its now 4" x 6"
4th pic. the baffels I removed from the upstairs duct work
I just came from the trailer and brdroom is warmer, I dont think it can get any better unless you run duct work directly from the furnance, but you can always keep a small electric heater in the bedroom, it saves on propane too

Rusty- Member

- Number of posts: 138
Registration date: 2011-03-27
Age: 64
Location: Sharon, West Virginia
Re: Heat to Bedroom 313RE
Sweet!
Earl
Earl

Mopar_Earl- Wildcat resident guru

- Number of posts: 1375
Registration date: 2008-08-18
Age: 34
Location: Saint Thomas, PA 17252
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum