I need help with this panel
Page 1 of 1 • Share •
I need help with this panel
I need help with labeling these face plates.
I can not find any information on their functions.
Thanks
Bear [URL][/http://i17.servimg.com/u/f17/14/47/80/02/wildca10.jpgurl]
I can not find any information on their functions.
Thanks
Bear [URL][/http://i17.servimg.com/u/f17/14/47/80/02/wildca10.jpgurl]

beartoo- Sr Member

- Number of posts: 268
Registration date: 2009-10-14
Age: 64
Location: Perham, MN

Re: I need help with this panel
Can you fix the link for the photo. I can't access it.

moo2613- Wildcat resident guru

- Number of posts: 1086
Registration date: 2008-04-07
Age: 38
Location: Ashdown, AR
Re: I need help with this panel
I was able to get the picture open:
http://i17.servimg.com/u/f17/14/47/80/02/wildca10.jpg
The pictures is pretty small.
But I cant tell you anything.
http://i17.servimg.com/u/f17/14/47/80/02/wildca10.jpg
The pictures is pretty small.
But I cant tell you anything.
_________________
FORUM MODERATOR
Tom & Sharon..... North East, MD
Good Sam Club Lifetime Member & Coast to Coast Member
Previously owned, and never forgotten, 2006 Wildcat 29RLBS
2010 Montana 3150RL Hickory Edition, Wet bolt kit and X-Factor added
11' Dodge 3500, Auto, 3.73, CC/LB, DRW 4x4
KSH Tool Box/Fuel Tank Combo



oldelmer1- Wildcat resident guru

- Number of posts: 2588
Registration date: 2008-04-05
Age: 57
Location: North East Maryland
Re: I need help with this panel
We don't have a panel like that.
When you try to post the picture again, while you "Host an image," - select the bottom url - I have a feeling you selected the url for thumbprint size. Many of us do that at some time or other.
I'm sure someone on the forum can help you.
Tater
When you try to post the picture again, while you "Host an image," - select the bottom url - I have a feeling you selected the url for thumbprint size. Many of us do that at some time or other.
I'm sure someone on the forum can help you.
Tater
_________________
Best Regards, Scruffy and Tater
Photos: http://picasaweb.google.com/ScruffyAndTater
2007 29rlbs -- 2006 F250 diesel 4-door -- Super-glide hitch

Our first trailer - a used Fleetwing - photo taken in early 70's

Scruffy and Tater- Wildcat resident guru

- Number of posts: 3867
Registration date: 2008-04-05
Location: Dallas/Fort Worth, Texas
Re: I need help with this panel
I am also at a loss. The best I can tell, it is for your entertainment area, but we don't have anything like that.
Thanks for the new link Tom
Thanks for the new link Tom

moo2613- Wildcat resident guru

- Number of posts: 1086
Registration date: 2008-04-07
Age: 38
Location: Ashdown, AR
Re: I need help with this panel
I don't have a panel like that either; maybe something the previous owner put in? The picture is low resolution so I can't really tell what the jacks are. Must be phone, audio, video.
_________________
Moderator
Scott, Alta, & Kodiak (choc lab)
Rocky Mountains
2007 Wildcat 29RLBS
2000 F350 7.3, Auto, Lariat. John Wood transmission & converter, 6.0 transmission cooler, Airdog, ITP reg return, AC single shot injectors, DP Tuner (6 tunes), live tuned.
Photos at: http://picasaweb.google.com/esz999


scottz- Wildcat resident guru

- Number of posts: 1660
Registration date: 2008-04-05
Location: Rocky Mountains
Re: I need help with this panel
They are all input and output jacks for the Concertone. I have the same thing.
John
John

AVid- Wildcat resident guru

- Number of posts: 612
Registration date: 2008-04-08
Age: 60
Location: Shelby Township, Michigan
Re: I need help with this panel
AVid
Do you know what is what?
One of these days maybe I'll be able to post a picture here.
Do you know what is what?
One of these days maybe I'll be able to post a picture here.

beartoo- Sr Member

- Number of posts: 268
Registration date: 2009-10-14
Age: 64
Location: Perham, MN

Re: I need help with this panel
Just guessing from the small photo.....
The upper left is the A/V input to the concertone with the input1 or input 2 switch (black dot).
Below it looks to be the cable/sat plate where the jumper or sat receiver wires.
Lower Right looks like the phone jack
Middle bottom looks like the RF output (TV cable aka RG6 or RG59) from the concertone.
The middle top may be a audio left/right RCA input (red/white?) for an audio only device like a Sirius radio.
The upper right is probably the composite video output from the concertone (yellow RCA)
The upper left is the A/V input to the concertone with the input1 or input 2 switch (black dot).
Below it looks to be the cable/sat plate where the jumper or sat receiver wires.
Lower Right looks like the phone jack
Middle bottom looks like the RF output (TV cable aka RG6 or RG59) from the concertone.
The middle top may be a audio left/right RCA input (red/white?) for an audio only device like a Sirius radio.
The upper right is probably the composite video output from the concertone (yellow RCA)

jetskier- Wildcat resident guru

- Number of posts: 1031
Registration date: 2008-04-05
Location: Minden, Nevada
Re: I need help with this panel
Thanks for the help.


beartoo- Sr Member

- Number of posts: 268
Registration date: 2009-10-14
Age: 64
Location: Perham, MN

Re: I need help with this panel
beartoo wrote:Thanks for the help.
Was I close?

jetskier- Wildcat resident guru

- Number of posts: 1031
Registration date: 2008-04-05
Location: Minden, Nevada
Re: I need help with this panel
I hope so,lol.
My dealer said the concertone would play DVD's but I am not sure how.
He also said he would sell me a bridge.
My dealer said the concertone would play DVD's but I am not sure how.
He also said he would sell me a bridge.

beartoo- Sr Member

- Number of posts: 268
Registration date: 2009-10-14
Age: 64
Location: Perham, MN

Re: I need help with this panel
Doesn't your concertone have a DVD player built in? Mine is (2006)
If not, that's where one of the upper left inputs would work to accept a external DVD player.
If not, that's where one of the upper left inputs would work to accept a external DVD player.

jetskier- Wildcat resident guru

- Number of posts: 1031
Registration date: 2008-04-05
Location: Minden, Nevada
Re: I need help with this panel
Oh, If the upper middle plate has the red/white RCA plugs, you're lucky. I had to pull the concertone out of the wall to find out I had them in the harness. I used them to hard-wire my Sirius radio to the concertone directly.

jetskier- Wildcat resident guru

- Number of posts: 1031
Registration date: 2008-04-05
Location: Minden, Nevada
Re: I need help with this panel
It seems that none of the Wildcats are wired the same...or correctly for that matter. I ended up taking the TV antenna plate in the bedroom down and the Concertone out to trace the various jacks. I found the antenna jack in the bedroom was wired wrong. After fixing that, in order to watch cable up there I had to make a jumper with a splitter to install by TV in the main room.
Wish I could tell you exactly which one did what but my drawing is in the Wildcat, which is frozen in storage.
Put a DVD in the Concertone and let it play. Then connect any video output to the TV and see what works. The DVD sound will come out of the Concertone speakers so only a video hookup is needed. You can also plug an IPod or any mp3 player into the Concertone. That is the panel with the 6 RCA jacks in it. Just select the input via the switch and in the Concertone and off you go.
Sorry I can't be of more help right now.
John
Wish I could tell you exactly which one did what but my drawing is in the Wildcat, which is frozen in storage.
Put a DVD in the Concertone and let it play. Then connect any video output to the TV and see what works. The DVD sound will come out of the Concertone speakers so only a video hookup is needed. You can also plug an IPod or any mp3 player into the Concertone. That is the panel with the 6 RCA jacks in it. Just select the input via the switch and in the Concertone and off you go.
Sorry I can't be of more help right now.
John

AVid- Wildcat resident guru

- Number of posts: 612
Registration date: 2008-04-08
Age: 60
Location: Shelby Township, Michigan
Permissions in this forum:
You cannot reply to topics in this forum