TV in bedroom model 29RLBS

I can't get the cable in bedroom to work. I have been told I the jumper cable would fix the problem. Where do I put the jumper? where is the sat/cable hook up?

Thanks, Tom

Hi Tom,

The jumper will need to be connected to the wall plate inside your entertainment center. You should have a wall plate there with 2 coax connectors. Just loop them together.

Hi Tom,
I have two different hookups for the cable in my entertainment center. should I remove both from the wall ? then will there be a place to hook the two of them together with the jumper cable? or do I have to do something else? will I need to use a splitter?

Thanks, Tom

Hi Tom,

Here is a picture of the wall jack. You have to remove the cable from the living room TV and put the jumper from the top to the bottom. I guess it you want both on at the same time, then yes, you would need a splitter to do that. Notice I labeled mine, CABLE & ANTENNA.

Oh, and you have to turn the antenna booster OFF in the bedroom for the cable to work there after you put the jumper in place.
Hope this helps... If not, just ask again.

[img]http://www.wildcatcamperforum.com/[/img]

Thank you very much. The picture did it. I am going put a splitter so I can have both tv's working at once.

Tom