I joined the club today.

View previous topic View next topic Go down

I joined the club today.

Post by Big Dave on 1/7/2009, 7:18 am

My uncle called and he needed his step sons fifth wheel moved. It was an older model and I only had to move it about 10 miles. Hooked it up and checked everything out to make sure it was road worthy and started to take off. I only had to make gentle turns and nothing severe at all but I wasn't paying attention and not being used to the rv I started off and had to make a slight right turn and sure enough got it into the corner of my cab. It's only a small dent and it missed the glass. It peeled some paint. :x

Only upside to the whole deal is that I've been needing to get the top of my cab and hood repainted because the paint is starting to get some small cracks where it's going bad. I guess this will speed up the process a bit.

Never fails when I try to help someone I end up getting screwed.

Big Dave
Sr Member
Sr Member

Number of posts: 304
Registration date: 2008-04-05
Location: Seymour Missouri

View user profile http://www.bigdaveswoodworks.com

Back to top Go down

Re: I joined the club today.

Post by oldelmer1 on 1/7/2009, 8:03 am

Hi Dave,
Bummer to hear about your little dent..

What brand of 5'er was it?

_________________
FORUM MODERATOR
Tom & Sharon..... North East, MD
Good Sam Club Lifetime Member & Coast to Coast Member
Previously owned, and never forgotten, 2006 Wildcat 29RLBS
2010 Montana 3150RL Hickory Edition, Wet bolt kit and X-Factor added
11' Dodge 3500, Auto, 3.73, CC/LB, DRW 4x4
KSH Tool Box/Fuel Tank Combo


oldelmer1
Wildcat resident guru
Wildcat resident guru

Number of posts: 2529
Registration date: 2008-04-05
Age: 57
Location: North East Maryland

View user profile

Back to top Go down

Re: I joined the club today.

Post by Big Dave on 1/7/2009, 8:11 am

It was a 40' 1991 coachman. It buckled the side just a bit but I think it will push back in and not be noticable. It's in descent shape but nothing I would want to tow around the country.

Big Dave
Sr Member
Sr Member

Number of posts: 304
Registration date: 2008-04-05
Location: Seymour Missouri

View user profile http://www.bigdaveswoodworks.com

Back to top Go down

Re: I joined the club today.

Post by Admin on 1/7/2009, 8:18 am

Yep,,,, That happens to all the good guys...


Me and my buddy own a car trailer together and he loaned it out to another buddy of ours - We're all 3 like brothers...

But : He was going through a divorce and needed the trailer to haul some stuff from his EX-house, Said he'd bring it back better than new.....

Well he brought it back with the front axle hanging off and the left fender ripped off.....
His Xwife came out and got the last word as he was pulling out of the yard and he Wacked a Pine Tree as she was screaming ........
He did pay for a new axle though.... and me and charlie got a good laugh out of it. What else are friends good for if you can't laugh at them ---- I mean with them....
lol!

_________________

Phillip , Carol & Meredith
2007 Wildcat 32Qbbs
2001 Ford F350, SRW 7.3 PSD,Mich tires, Reese 16K ,FW tailgate.

Admin
Admin

Number of posts: 2869
Registration date: 2008-04-04
Age: 50
Location: Milledgeville,GA

View user profile http://www.wildcatcamperforum.com

Back to top Go down

Re: I joined the club today.

Post by Stanford on 1/7/2009, 9:33 am

Also been there and done it. Way I look at it we are helping the Economy (Body Shops). 40 foot bet that suckers Heavy.

Stanford
Sr Member
Sr Member

Number of posts: 351
Registration date: 2008-12-01
Age: 68
Location: Blairsville,GA The North Ga Mountains

View user profile

Back to top Go down

Re: I joined the club today.

Post by moo2613 on 1/7/2009, 9:58 am

Sorry to hear it, the Cat dealer was out $800 when they did it to my truck. The body shop had to replace the whole pillar.

moo2613
Wildcat resident guru
Wildcat resident guru

Number of posts: 1035
Registration date: 2008-04-07
Age: 38
Location: Ashdown, AR

View user profile

Back to top Go down

Re: I joined the club today.

Post by shooter on 1/7/2009, 11:29 pm

I've been pretty lucky so far (knock on wood), but did come really close though.

_________________
- Mike -

Mike's modifications: http://community.webshots.com/album/180262704smXHmj
2001 Chevy 2500HD 4x4,8.1,Alli,3.73,CC,SB,
Bilstein shocks, CIPA 70600 mirrors, spray-liner,
Reese 16K Slider, Prodigy Brake Control,
early production 2005 Wildcat 29 BHBP w/Carefree SlideOut Kover II slide awning &
Demco Glide-Ride pin-box, Trail Air Equa-Flex suspension (self upgrade - not OEM)

shooter
Wildcat resident guru
Wildcat resident guru

Number of posts: 1358
Registration date: 2008-04-05
Location: Just West of Richmond, VA

View user profile http://community.webshots.com/user/shooter_va

Back to top Go down

Re: I joined the club today.

Post by Scruffy and Tater on 1/8/2009, 2:16 pm

Dave,
I'm glad the damage wasn't worse. I hope you were able to finish moving the 5th wheel.

_________________
Best Regards, Scruffy and Tater
Photos: http://picasaweb.google.com/ScruffyAndTater
2007 29rlbs -- 2006 F250 diesel 4-door -- Super-glide hitch

Our first trailer - a used Fleetwing - photo taken in early 70's

Scruffy and Tater
Wildcat resident guru
Wildcat resident guru

Number of posts: 3732
Registration date: 2008-04-05
Location: Dallas/Fort Worth, Texas

View user profile

Back to top Go down

Re: I joined the club today.

Post by Big Dave on 1/8/2009, 2:29 pm

Yes I finished moving the fifth wheel. After the crunch I slid the hitch back and continued on. Should have done it to begin with but just couldn't see that I was going to turn that tight. It was out in a field and looking back I wonder if the trailer didn't drop into a hole and tip it to one side which made it contact the truck because I wasn't turned very sharp at all.

Oh well, the damage is done just have to get it fixed this summer when I can do without the truck for a week.

Big Dave
Sr Member
Sr Member

Number of posts: 304
Registration date: 2008-04-05
Location: Seymour Missouri

View user profile http://www.bigdaveswoodworks.com

Back to top Go down

Re: I joined the club today.

Post by MaxRock on 1/9/2009, 8:18 am

Sorry to hear about your damage. That is one thing we have to worry about w/ 5ers, hitting the rear of the cab plus possibly hitting the bed rails. I have a long bed and with the extended pin box on the Cat, hitting the cab is not a problem. I believe I could turning more than 90* and still not contact the cab. The bed rails I worry about when entering and exiting parking lots and such.

_________________
-Mark

'04 Wildcat 29BHBP

'02 Chevy 2500HD
DMax/ZF 6 Speed, CC/LB, VA 0-70-110 HP Tuner, Boost/EGT gauges,
SBC Single Mass Flywheel & ceramic/kevlar single disk clutch, 5" exhaust
B&W Turnover Ball, B&W 18k# 5th wheel Companion Hitch
BrakeSmart Brake Controller, TTT Mirrors

MaxRock
Wildcat resident guru
Wildcat resident guru

Number of posts: 1157
Registration date: 2008-04-07
Age: 52
Location: North Texas; Between Dallas & Oklahoma!

View user profile

Back to top Go down

View previous topic View next topic Back to top


Permissions in this forum:
You cannot reply to topics in this forum